null

MADE IN THE USA

Questions? CALL US 805-584-8635

About GenRight's Suspension Systems...

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!


Turn your TJ into an LJ!

This simple kit will give you the same up travel we offer in our Tracer coil over shock suspension kit.

All parts are key notched (puzzled) to fit together and self fixture for easy assembly by the installer.

When done, your TJ will even take a factory Jeep Unlimited LJ hard top or soft top!

The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

 
The GenRight Tracer kit is geometry that was off-road race Inspired, this “system” is designed for the highest level of performance for their Jeep on AND off road. Longer wheelbase, lower center of gravity, without sacrificing suspension travel. Specifically designed for a Chevy LS3 & 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.


36 of 87 Items
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit for 3.5" axle tubes SUP-2002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit for 3.5" tubes

    This is the axle side, lower bump stop "pad" from GenRight Off Road. Specifically designed for the larger 3.5" axle tubes, like a 14 bolt. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with...

    $199.99
  • GenRight's Axle Side 20 degree Lower Control Arm Mount for 3.5" tubes One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for the larger 3.5" diameter axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line...

    $69.99
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets for 3.5" tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically made for 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the...

    $69.99
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 for 3.5" diameter axle tubes Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for larger 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly...

    $69.99
  • BKT-2110 lower control arm 10 degree brackets for a 3.5" diameter axle tube. Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Made specifically to fit the larger 3.5" tube axles like a 14 Bolt or other aftermarket axle housings. Heavy Duty 1/4" thick is precision formed into shape so...

    $69.99
  • CE-9110T Johnny Joint Tool for Rebuilds Tool shown here compressing the joint to remove the retainer clip Rock Jock Johnny Joint Sizing Chart

    RockJock

    Tool for Rebuilding 2.5" Johnny Joint

    RockJock's Johnny Joint Tool is designed to make assembly OR disassembly of our 2-1/2 in. Johnny Joint Rod Ends simple! For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be...

    $150.00
  • CE-9110RK Rebuild Kit for 2.5" Johnny Joint As delivered CE-9110RK Rebuild Kit for 2.5" Johnny Joint Rock Jock Johnny Joint Sizing Chart Rebuild kit for the Johnny Joint CE-9114 that looks like this

    RockJock

    Rebuild Kit for 2.5" Johnny Joint

    This is a REBUILD KIT for a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie). This patented design has a special compound urethane cup(s) which absorbs the high impact loads from damaging suspension mounts. This is the same joint used on...

    $21.00
  • GenRight Standard Rocker Guard Extensions

    GenRight

    GenRight Standard Rocker Guard Extensions

    This is a 24" piece of material the same "L" shape and thickness as our Standard 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase. Perfect...

    $49.99
  • GenRight Mini Boatside Rocker Guard Extensions

    GenRight

    GenRight Mini Boatside Rocker Guard Extensions

    This is a 24" piece of material the same shape and thickness as our Mini Boat Side, 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase...

    $59.99
  • TABS ONLY for the GenRight Off Road's Universal Transmission Crossmember Kit 4 tabs only for the BKT-1050 Cross member kit Close up of the TABS on each side of the urethane cross member kit. TABS welded to the inside of the frame so there is clearance for your exhaust. Drop in trans cross member kit tube provides clearance for t-case yoke and exhaust pipes.

    GenRight

    Universal Transmission Crossmember TABS

    This is the four TABS only for the GenRight Universal Cross Member Kit.   Features: 4 Laser cut tabs (from the BKT-1050 kit). Includes what is pictured. 100% Made in U.S.A. Important Notes: Designed to work with GenRight Belly Up...

    $19.99
  • All new aluminum cargo area for your Jeep TJ The GenRight Growler YJ stretched to LJ length. Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor

    GenRight

    YJ to LJ Cargo Area Kit

    This is our YJ to LJ Cargo Area Kit to go with our YJ/TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your...

    $1,899.99
  • When the TJ to LJ back half kit is assembled it looks like this The Genright Off Road TJ to LJ kit (and YJ). Tub "patch piece" that makes it look like a factory LJ This is the new rear frame tacked into place This is the factory frame to new frame fish plate reinforcement

    GenRight

    TJ to LJ Frame Kit

    This is the GenRight Off Road TJ to LJ Frame Stretch Kit (YJ too).. Do you have a bunch of money invested into your Jeep TJ, but wish it was an LJ for the longer wheelbase and increased cargo area? Now you can take any Jeep TJ or YJ (previously...

    $1,999.99
  • TJ to LJ Body Extension Panel with soft top lip. TJ to LJ Body Extension Panel pieces. Easily welded into place to look completely factory!

    GenRight

    TJ to LJ Body Extension Panels

    This is the formed sheet metal pieces you need to fill the 15" gap in your tub when using our TJ to LJ conversion kit. Once done, a factory LJ Hard top or Soft top will fit your TJ. Features: Two pieces for each side (4 pieces total). Same...

    $99.99
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
  • All new aluminum cargo area for your Jeep TJ Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor This is how it looks after cutting out the stock cargo area floor.

    GenRight

    TJ to LJ Cargo Area Kit

    This is our TJ to LJ Cargo Area Kit for our TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your GenRight corner...

    $1,899.99
  • Jeep Tj / LJ Legend Suspension Package (Base package pictured) Jeep Tj / LJ Legend Suspension Package (Base package pictured) Turn your Jeep Wrangler TJ into a stable and capable off road machine! Easy to see GenRight Legend kit coil over conversion on the Jeep Wrangler TJ frame. Rear setup with King Coilovers and Air Bumps

    GenRight

    Jeep TJ / LJ Legend Suspension Package

      This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market since 2006! This package is also good for a 5"-7" rear...

  • GenRight's Jeep Wrangler TJ "Tracer" Suspension Kit TJ Tracer frame side control arm mounts and skid plate installed Jeff testing the TJ Tracer kit out on the trail TJ Tracer frame side control arm mounts and skid plate installed Good picture of ride height compared to Terremoto

    GenRight

    Jeep Wrangler TJ "Tracer" Suspension Kit

    This is GenRight Off Road's Tracer center section for the Jeep Wrangler TJ, 1997 - 2006. This is a scaled down version of our famous LJ Tracer suspension system which has all the proven suspension geometry from our 4500 Class off-road race Jeep...

    $1,999.99
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
  • High Capacity Fuel Tank for the Tracer Suspension View of the axle side of the High Capacity Fuel Tank for the Tracer Suspension Side view of the High Capacity Fuel Tank for the Tracer Suspension 100% TIG Welded 1/8" thick Aluminum Tank Here you can see the fit using a Currie 70 rear axle and the 6053 tank

    GenRight

    26 Gal Gas Tank for Tracer Susp w/7" Stretch

    This is the larger capacity fuel tank is designed to work with the GenRight Tracer Suspension System in a stretched Jeep Wrangler LJ. Fully assembled and designed to accept the factory Jeep 05-'06 fuel pump module (or the Aeromotive Phantom in-tank fuel...

    $1,949.99
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

     This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your...

    $149.99
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $999.99
  • Jeep LJ Tracer Stretch Corner Guard Set - Aluminum Here is how it works, we move the entire wheel opening back 4" Shown here with a EXT flare to move the axle even further back!

    GenRight

    Tracer Stretch LJ Corner Guard Set - Aluminum

    This is the Aluminum "Full" type Corner Guard for the UnlimitedJeep Wrangler LJ with STRETCH FENDER WELL location for the GenRight Off Road TRACER suspension. Features: Laser cut and shape is formed with a custom "one hit" die to assure a...

    $899.99
  • Currie short arm suspension kit for the Jeep TJ or LJ

    RockJock

    Suspension Lift Kit for the Jeep TJ/LJ, CE-9100A

      This is the top quality Rock Jock suspension kit (designed by John Currie). It includes a complete set of 8 genuine Johnny Joint® Control Arms for the 1997-2006 Jeep TJ's and LJ's. All arms are heavy duty and fully adjustable...

    $1,850.00
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Elite Axle Side Trac Bar Mount (2 or 4 Door JK)

    This is a Heavy Duty GenRight axle side Trac Bar mount from the Elite Suspension system or the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) or Dynatrac front axles. It keeps the front axle under...

    $99.99
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99
36 of 87 Items